Operating Voltage is 4.7V to 5.3V
Current consumption is 1mA without backlight
Alphanumeric LCD display module, meaning can display alphabets and numbers
Consists of two rows and each row can print 16 characters.
Each character is build by a 5×8 pixel box
Can work on both 8-bit and 4-bit mode
It can also display any custom generated characters
Available in Green Backlight
Description
Pin No: Pin Name: Description
1 Vss (Ground) Ground pin connected to system ground
2 Vdd (+5 Volt) Powers the LCD with +5V (4.7V – 5.3V)
3 VE (Contrast V) Decides the contrast level of display. Grounded to get maximum contrast.
4 Register Select Connected to Microcontroller to shift between command/data register
5 Read/Write Used to read or write data. Normally grounded to write data to LCD
6 Enable Connected to Microcontroller Pin and toggled between 1 and 0 for data acknowledgement
7 Data Pin 0
Data pins 0 to 7 forms a 8-bit data line. They can be connected to Microcontroller to send 8-bit data.
These LCD’s can also operate on 4-bit mode in such case Data pin 4,5,6 and 7 will be left free.
8 Data Pin 1
9 Data Pin 2
10 Data Pin 3
11 Data Pin 4
12 Data Pin 5
13 Data Pin 6
14 Data Pin 7
15 LED Positive Backlight LED pin positive terminal
16 LED Negative Backlight LED pin negative terminal
Click Here to BUY
Comments
Post a Comment